Important Tips to Lower Your Water Heater Energy Costs

Winters have approached and in the chilling winter water heater is one of the important home appliance that consumes a lot of energy. If you are looking forward to cut back on energy costs, water heater is the right place to start from. Adjusting few degrees of your water heater temperature is a good idea, but before doing the same one should consider the fact that if the set temperature is too low, water heater can turn into a breeding ground for dangerous bacteria. On the other hand, if the temperature is high it might led to a scalding accident.

What should be The Optimum Thermostat Temperature?

You might be wondering then what should be the optimum temperature. As per U.S Department of Energy, 120 degrees Fahrenheit is the recommended temperature setting. Nowadays most of the new water heaters comes with aforementioned preset thermostat temperature.

This temperature is ideal for prevention from many harmful bacteria and pathogens from multiplying and further breeding. With the rise in temperature, pathogens die off quicker. For a person with a strong immunity system, 120 degree Fahrenheit temperature is considered as safe as well as minimum temperature. Any temperature higher than this and closer to 140 degree Fahrenheit is good for those having a compromised immune system. Moreover if you want to use hot water for your dishwasher you’ll need to set the temperature a bit higher (in case your dishwasher doesn’t possess self-heating feature).

How to Prevent Any Scalding Accident?

Boiling water at nearly 140 degrees can cause a third degree burn in just few seconds. Whenever you on your faucet or shower head, it takes few second for hot water to travel through pipes. The situation is that you can’t even figure exactly when the scalding water will arrive. Small children and toddlers are more prone to such accidents as their skin is highly sensitive and thinner than adult skin. Reaction time, mobility and sensitivity are some other factors that attribute to higher burns in children.

Anti-scald valves are the solution to prevent scalding accidents. By installing these valves at each point of contact with hot water, water heater thermostat can be set up to 140 degree Fahrenheit. Installation of the same is quite a complex job and it is advisable to hire a licensed plumber.

How to keep the system energy Efficient?

Saving in terms of energy as well as money is crucial but same can’t be done at the cost of the health. However it is possible to save few bucks without making any adjustments with water heater thermostat. Here are some tips that can facilitate in your cost cutting mission:

  • Less water usage as per requirement.
  • Insulation of hot water heaters and pipes.
  • Replacing your existing old fashioned water heater with energy star efficient water heater.

Are you looking for plumbing solution for your home? Dallas Plumbing Company is a licensed plumbing service provider offering a wide range of plumbing and heating solutions across Dallas and nearby areas call us today to fix any of your plumbing problems.

Water Heater Systems

There are a great deal of choices whenever it comes to water heaters. A water heater comes in either electric or gas with each fuel supply offering another method to heat the water within the home.

Electric Water Heater

water heaters Dallas

How Does A Water Heater Work?

The most important advantage of a gas heater is that it saves the homeowner more money due to its ability to heat water faster than its counterpart. An electric water heater is the more popular option amongst units due to its consistency.

An electrical water heater warm water very fast so there isn’t any gap between chilly and hot. The homeowner instantly receives warm water for many things in the house that include:

  • Bathing/showering
  • Washing dishes

Tankless & Solar Water Heaters

Tankless and solar water heaters are some thing new on the plumbing industry. They supply hot water immediately but are more streamlined and efficient. A tankless system, by way of instance, utilizes either gas or electric so as to heat up the water.

One of the main benefits to a tankless system is the cash savings. There isn’t any money being spent on heating the tank filled with water such as traditional units do. It does have some limitations though since it might not have the ability to heat the whole household.

Solar water heaters are heated by sunlight. Panels are installed which help heat the water up. As it’s a newer approach to warm water in the house, there are a number of disadvantages like the primary installation cost being on the other hand.

The main benefits of a solar hot water heater is that it provides the homeowner with a more affordable run time and doesn’t cause pollution. Solar also helps cut down on the dependence of electrical and gas too.

Maintenance
It’s responsible for heating water in the house and allowing for warm showers to be obtained along with the “Warm” setting on the washer.

A heater that’s been preserved will last anywhere from 10-15 years. If and when it goes; the owner will see the following indications as these are signs that it needs to be replaced:

Hot water which doesn’t last

  • Noises
  • Leaks
  • Odd taste or odor of water
  • Little to no hot water

whatsoever may be a problems coming from the thermostat. If the water tank begins to show such signs, it is important that a local plumber is called in immediately to replace the thermostat.

Most electrical appliances create noises. But when there’s a loud banging noise, it might indicate that the unit has to be replaced or repaired. It all depends on what the issue is.

Odd tasting or smelling water means the water is tainted. This may means that the device has obsolete or not being cared for properly as maintenance is necessary for many plumbing appliances.

Replacement
If the water heater has gone out for good, updating to a new system is beneficial. New and efficient models can function well into the future without needing any maintenance.

All About Gas Water Heaters

Gas water heaters are among the best choices you can use in your home when it comes to getting hot water all around your property. You must find a good model that fits your needs in any situation.

How It Works

A gas water heater works with these steps in mind:

  1. A gas-powered current should be administered. The gas energy will come from an electric outlet or connection. The current is generated by a burner typically on the bottom part of the tank.
  2. Over time the heater will collect water. This will move into a sturdy tank space.
  3. The heater will activate as it identifies water. It will start to heat up the water when starts to notice that the water is below a certain temperature setting.
  4. The heater will continue to operate as it notices changes in the temperature of the water.
  5. You can then get the hot water moved all around your home through proper signals. These will be triggered by hot water knobs or levels around different items in your home. It can take a bit of time for the hot water to be generated although that depends heavily on how your heater is set up.

What Makes a Gas Heater Useful?

A gas heater is useful in that it can consistently take in water and ensure that it is heated properly. It provides you with enough hot water for many commonplace functions. It also protects the water as it comes with a sturdy insulation barrier. This adds weight to the heater but also makes it easier for you to use.

What to Find In One?

When getting one of these heaters to work in your home, you should make sure it comes with all the necessary parts. You should watch for the size of the heater. It can handle dozens of gallons of water at a time. You would have to look at your general water usage standards to see how much you should be using at a given time.

Also, you should see that the tank has enough controls to make it useful. Anything that lets you adjust the temperature with ease and care always helps. Don’t forget to find something with accessible shutoff valves.

The physical arrangement of the tank is also important. Look at its insulation and see if it is powerful enough to last for years to come. Remember, you would have to replace the heater if it starts to leak.

Gas water heaters are amazing tools to have in your home. Look at how one of these may work for your heating needs so you will get the most out of your plans for handling heat and getting water out to many spots in your home.

Water Heater Maintenance and Tips

What is A Water Heater System?

A warm water heating system is a device that transforms energy to heat and transfers that warmth to water. It’s linked to a cold water supply pipeline, and has an outbound warm water pipeline, or system of pipelines, that provides heated water to the taps and devices in your house.

It’s Important to Arrange Regular Maintenance Checkups

water heaters Dallas

How Does A Water Heater Work?

It’s important to bring in a specialist to carry out a routine examination on your hot water heating system. When it comes to water temperature level, it’s extremely vital that your hot water runs as effectively as possible.

Ineffective warm water heating units are a prime source of co2 poisoning, which can cause health problem and death. If you’ve got the means, consider updating your warm water heating system if it is at all possible.

New Energy Star ranked warm water heating units, tanks less or otherwise, pays for themselves with time in energy cost savings, and is a simple method to assist lower energy intake if you’re worried about your effect on the environment.

Water Heater Maintenance and Tips

No matter whether you choose a standard tank device, or shift to a tank less design, you can take specific steps to enhance your warm water use and conserve cash. Lower the thermostat on the water heater to 120 degrees to minimize heating expenses and to prevent scalding. Your water heating system must never ever surpass the 120 degree limitation to avoid major injury if you have kids in the house. Children do not comprehend the distinction in between cold and hot dials on tubs and sinks, so taking this crucial preventative measure can quickly ward off journeys to the emergency clinic if the unimaginable would happen to occur.

Tankless vs. Traditional Water Heaters

A traditional water heater stores heated water in its tank. Tankless water heaters bypass the tank and path heated water straight to home appliances or taps instead. The majority of water heaters are powered by gas, although electrical water heaters are not uncommon. Where gas is readily available, it is without a doubt the most reliable fuel for heating up the water in your house.

How Tankless Water Heaters Work

When a hot water faucet or home appliance is turned on, tankless water heating units distribute water through a series of burners or electrical coils. It costs less to run and does not run out of hot water unless the circulation surpasses its heating capability due to the fact that the hot water heating system does not save hot water.

A tankless system might not be able to manage the circulation if 2 individuals take different showers at the exact same time. A homeowner can conserve huge amounts of cash on water heating costs by thoroughly controlling the circulation of hot water through the house. If you are uncertain whether your warm water requirements work with a tankless design, it’s well worth it to talk with plumbing professional or warm water heating unit provider about expenses and whether a tankless device can fulfill your requirements.