Most Efficient Heating System for My Home?

As we prepare for the fall and winter months, it is important to review the current heating systems in their homes to ensure that they are at their most efficient working capacity. For some of us, it may be time to invest in a new heating system for our homes. This is a great time to review the heating systems that are available on the market to ensure that you choose The most efficient heating system possible


In this article, we will discuss the various types of heating systems and how to choose an efficient one for your home. Read on to learn how efficiency is defined in the HVAC world and how to maximize on it in your home this winter season.

What Does “Efficient” Mean?

Essentially, efficiency in the heating and air-conditioning world is defined by the amount of energy that is used to produce the heating or cooling temperatures that our homes need. To keep your home comfortable, you should choose a heating system that consumes the least amount of energy.  

Homeowners are interested in efficiency because it helps reduce their utility bills and get the most use out of their heating system. When shopping for your heating system, look for the annual fuel utilization efficiency rating (AFUE). The higher the rating, the better efficiency your heating system will have. 

Are you struggling with working a new heating system into your budget? Check out our financing options for your new heating system. 

Types of Heating Systems

To choose the most efficient heating system, you must be aware of the types of heating systems that are available. In general, there are three types of heating systems to choose from and they are outlined below. 


Furnaces are popular for those homes who operate on natural gas. They heat the air through a heat exchanger and release it into the home through the ducts. Using a blower, the ductwork installed in your home will distribute the warm air throughout the house. This system is often referred to as central heating. 

Furnaces are among the most efficient heating systems and are generally more affordable.When shopping for a furnace, you will find that it has the most efficient heating system ratings in comparison to the other options.

Heat Pump 

A heat pump is normally part of your air conditioning system that begins its work when you set your thermostat to the heating setting. It essentially functions as a heating and air conditioning unit in one. It functions by absorbing the air in your home, adding heat to it, and releasing it back into the rooms throughout the house. 

Heat pumps are loved by many homeowners because of their quiet operation. However, their efficiency is dependany upon the weather conditions. It isn’t the most efficient heating system in colder climates, thus increasing operational costs. The initial installation fees can also vary between greatly, depending on the heat pump you select.


Boilers are the oldest heating systems and have been used for centuries. They heat the home by distributing hot water through pipes and radiators. They are very efficien when operated on natural gas, with some AFUE ratings of high 90s and even 100s. Operational costs can be lower because of the efficiency ratings but installation and repairs are very costly. 

How to Choose the Most Efficient Heating System

The heating system you choose will vary on several factors. First, you have to choose the heating system that uses the power source available in your area. For example, some parts of the U.S. use natural gas and others use electricity or oil. 

Next, you have to consider your budget and the needs of your household. The most efficient heating system has to be appropriately sized to be able to serve well. The best thing to do is to consult your local furnace technician who will be able to guide your decision with their expert knowledge. 

Contact for Your Heating Needs!

Dallas Plumbing Company has been around for over a century, boasting of unmatched experience and skills when it comes to heating installation and repair. Our technicians will be able to assist you and answer all your questions about your new heating system. Contact us today by calling (214) 340-6300

Top 5 Reasons to Hire Professional Heating & Air Conditioning Service in Dallas, TX

Home Air Conditioner Parts and Services That a Professional Can Handle

Hot Texas summers tend to overload air conditioning systems. Regular maintenance ensures your system is equipped to handle the heat and helps prevent issues before they happen. An efficient unit is essential to keeping your home cool and comfortable. A trusted and certified Dallas A/C service provider can handle all your A/C issues including repair, maintenance, installation, or upgrade. Hiring a professional HVAC technician in Dallas helps you to avoid issues, delays, and get repairs done quickly.

  1. Safety: A/C service involves a lot of risks, and your safety is of utmost importance. The hazards involved in A/C repair need to be dealt with carefully to avoid injury and additional damage to your system. The high voltage of an A/C unit makes electrocution a very real danger. A/C maintenance and repair is best handled by an experienced HVAC technician. In addition, the refrigerant inside an A/C unit is highly toxic and should be handled and disposed of with care. Exposure can lead to frostbite and selecting the correct refrigerant for your unit is necessary for regulation compliance. Always select an experienced and licensed HVAC repair technician to handle your A/C service.
  2. Expertise: A certified A/C technician can perform the assigned job in a timely manner and has the perfect mix of knowledge and experience to accomplish the job properly.
  3. Quick Results: Professional HVAC technicians are known for their commitment and prompt services. Don’t wait to get your A/C unit repaired. Our expert technicians will arrive within the scheduled time frame to provide an assessment of your unit and a repair timeline with the next steps for peace of mind.
  4. High-Quality Service: Professional A/C servicing companies staff experienced technicians with the right tools & knowledge to resolve any issue efficiently. An expert technician can diagnose the system and provide a repair schedule to minimize stress and inconvenience. During routine maintenance, the technician will advise you on how to prevent any further issues, as well as the steps you can take to improve the overall efficiency of your air conditioning system.
  5. Long Term Maintenance Without Damaging Warranty: A/C maintenance should be scheduled annually, especially for homeowners in Dallas, Texas. Regular maintenance ensures optimal performance for your A/C unit and helps you proactively avoid unnecessary issues that may prevent you from keeping your home cool during the summer. Attempts to repair or service a unit without proper certification can void the unit’s warranty, leaving you without the benefits provided by the manufacturer. Protect your warranty by selecting qualified air conditioning and heating professionals. Don’t put your system or your home at risk. Call an expert to resolve your heating and air conditioning issues and help you prepare for the Texas heat.

    For a complete check-up of your system, call the licensed professionals at 214-340-6300 in the Air Conditioning division of Dallas Plumbing Company.

Choosing The Right Heating and Cooling Company

Choosing the right heating and cooling company may be difficult if you don’t have the prior knowledge of the process. In fact, this can cost you extra money if you don’t know the right company for the job. Here are some factors to consider to help you find the best heating and air repair service.

Professionalism of the Heating and Air Conditioning Service Company:

It is a quality claimed by many but demonstrated by few. So many people hire heating and cooling firms without checking on their professional status. An expert in the field of commercial heating and air conditioning service should be qualified by industry institutions of accreditation.

This simply means that a professional heating and cooling firm should have one or two certificates to prove competence before servicing prospective clients. Professional accreditation is required by law in Texas, and current license numbers must be displayed on vehicles, advertising and documents.

It’s no affront to ask about these qualifications from your selected heating and cooling company. Don’t take the next step until you are confident that they have the required certification and licensing,

How Long Has the HVAC Company Been In Business?

Believe it or not, firms who have history in the industry can best meet the needs of prospective clients. If you need emergency service, find out how long the company has been in business. A service company the continues year after year providing top-rated, professional services, can usually be trusted to serve your needs. Just ask them. It’s a valid question when planning to choose a heating and cooling company.

Does the Company Have Insurance Coverage and a Satisfaction Guarantee?

One of the biggest factors that cannot be underestimated when searching for a professional heating and cooling firm is insurance coverage. To be clear here, insurance coverage protects you the prospective customer, from any damage to your property and future problems arising from the work performed. This coverage is never 100%, so it’s a good idea to check your own homeowner’s coverage.

Many people usually ignore or overlook this step when choosing an air conditioning company. Using this factor will help you get insured and covered when hiring a commercial plumbing company. In fact, you will always be comfortable after asking about the insurance coverage of your selected firm.

Do You Have A Budget/Money Issue?

Ask about the rates and costs before you commit to an appointment. Service technicians usually charge by  the hour and the time varies depending on the tasks, environment, parts required, and installation variables, some of which cannot be determined in advance. Never hire or chose a heating and cooling company without asking about costs. It can be a painful experience if things turn out the wrong way. If your project is extensive, ask for a quote before you commit to having the work done. For this reason, it is important to carry out your search effectively. Only settle for the best firm that suits requirements and your budget, but keep in mind that the quality of the job done is most important. Choose carefully and get it done right.

In a Nutshell, Here’s Your Quality Assurance Checklist for Choosing the Right Air Conditioning and Heating Company

  • Professionalism
  • Licensing and certification
  • Satisfaction guarantee
  • Reputation
  • History of success
  • Insurance
  • Cost estimate

Three Things to Check for Your Home Heating Repair Needs

Your home heating system can wear out due to a variety of problems. It might not be maintained regularly or it might have been used for far too long. Perhaps the unit is an older model that requires more power.

HVAC Repair ServicesRegardless, you must repair your home heating system at some point in time.There are three important things that must be reviewed in your system.

These should be checked to see that whatever you are using is safe and capable of generating enough heat.

These can even be checked before any problems come about in your system so you can get a clear idea of what needs to be done to prevent any problems from being worse than they could be.

Air Filters

First, you should look at the air filters in your heating system. The air filters in your heater can develop a substantial buildup over time. This will keep air from moving well and can clog up many other parts in your heating system.

Air filters should be cleaned out or replaced every month. In many cases, a repair can simply entail different filters replaced although it is best to do this as soon as possible. This is to prevent serious problems relating to a filter working from developing.


The second point entails the thermostat. The battery in your thermostat should be tested to see that it is working properly. Sometimes the battery can be replaced to fix your system. You would simply need to replace the batteries to test it.

The thermostat can be examined based on how well heat can be generated. A test can be used to see how well air moves through the heater. The test may help you see if there are problems relating to your heater or if it is working fine.

Power Source

The third and final point to check is the power source for your heater. If the thermostat and filter are both changed around and the situation does not improve, you would have to get the power source replaced. The circuits to your system would have to be inspected to see that everything is safe to handle.

A circuit breaker can blow a fuse on occasion. This could keep the power from moving through the heater well enough. It creates a real problem in many cases, but if fixed properly will be a little easier to work with.

If you have questions, call the Dallas residential home heating experts, Dallas Plumbing Company.

Reasons for Residential Heating Repair

What Reasons Do You Have for Residential Heating Repair Needs?

The needs that you hold for residential heating repair can be rather varied. You’ll have to get your HVAC system fixed up right if you have certain problems that can come about on occasion. These issues can be rather serious over time and can keep your system from running as well as it should.

Dallas HVAC

Filter Issues

The air filter in your residential heating system can become dirty over time. This makes it harder for air to circulate well. The limit switch responsible for controlling the fan inside your system might also be harmed by the excess materials inside your system.

Thermostat Not Working

You can contact a residential heating repair professional if the thermostat to your system is not working properly. A thermostat that isn’t working right could keep the fan in your system from working right. This can be a real problem if not handled well enough.

If the thermostat stops working, the heater might not work at all. This could keep a spot cold as the thermostat is not reading the ambient conditions in your area. This could be a threat that keeps the air quality in your home from being comfortable.

What About the Ignition?

The pilot control or ignition feature works electrically to get the system working right. When the ignition or pilot feature stops working, the system will not heat up as well as it should. This can create a real problem with regards to keeping your space comfortable.

When the Blower Keeps Running

The blower in your system might keep on running even when you don’t want it to run. When this occurs, you should get your system repaired. A limit switch in your system might not be working when the blower keeps on going.

When Sounds Come About

Any unusual sounds coming from your heater should be addressed immediately. Many of these sounds in your system are caused by factors like a mechanical part not working right or being dislodged. A burner might also be clogged up, thus being harder to operate. When these sounds occur, your system will not work properly. The system should be fixed properly to keep such problems from being worse than they already are.

Fast Cycles

The cycles that work within your system are important to its success. However, over time those cycles might be too frequent. They might become short or otherwise hard to maintain.

When the cycles go frequently and short, there is often an issue like air not flowing well or a limit switch not running right. These problems can cause your system to stop working right. You must get your system repaired as soon as possible if you come across such a problem in any case.

Contact your residential heating installation and repair service provider as soon as possible if you notice any problems in your system. You must get problems fixed right and as quickly as possible so any issues that come about will not be worse than they could be.

5 Most Common Home Heating Problems

5 Most Common Home Heating System Problems You Might Encounter

When getting your home heating system under control, you will more than likely come across various problems that keep your system from working properly. These common problems can be a real burden to your property if not treated right. The five issues here should be fixed as soon as possible to keep any hassles in your home from being worse than they might be.

#1-Dirty Filter

commercial hvac servicesThe filter in your heating system is responsible for collecting dust and old compounds that get into your heater. When the filter becomes dirty, it becomes harder for the system itself to stay functional.

The system will require more power just to stay active. In addition, the air that goes through your system will be at risk of being far too dirty and otherwise hard to handle. This can be a real concern when handled improperly.

#2-Air Not Circulating Right

The air in your home might not be circulating the right way in some cases. The air might stop working well due to a fan motor or belt not working right. This could keep air from moving into certain spots in your home.

Sometimes the air might not move right due to the vents in your home being clogged or dirty. The air will not move clearly and carefully through some spots depending on any problems that might have come across within your vents.

#3-Ignition Problems

The system pilot and ignition control are responsible for turning your system on and off. When the system works right, it will be easier for you to get the warm air needed in your home.

When these features are not fully functional, your system will stop working as well as it should. The heat cycles will be intermittent at this point. They might not even work at all depending on how your setup is run.

#4-Broken Thermostat

The thermostat in your heating system is responsible for regulating the total amount of heat that should be generated within your property. You must get a proper thermostat working and even programmed to make your system work at an appropriate time.

Even so, the thermostat might stop working in some cases. The thermostat will stop functioning due to a weak connection or from the heat not moving through your home properly. The entire system must be checked alongside your thermostat to see if there is a problem in your home and to get an idea of what should be fixed.

#5-Leaks in the System

Sometimes a leak might cause your system to stop working right. When the system weakens, air can move out from your system or vents. This keeps the air from circulating properly. Sometimes you might have to turn the heat up in your property just to get enough warm air to move around right. This can be a concern that keeps your system from running right and could cause you to use more energy than needed.

Humidifiers and Heating Units

Using a Humidifier Works Well with Your Heating Device

While a great heater can warm up any spot in your home during the winter season, it can be rather difficult for you to get moisture in a home during the winter. The dry air of the winter can be bothersome to anyone. Fortunately, a humidifier can be used to help you get the most out of your heating device.

The air in your HVAC unit will be dry like the rest of the outdoor air during the winter season. Therefore, having a humidifier alongside your heater is always a good idea to consider. This can improve how your home gets enough heat while being rather efficient in the process.

What Makes a Humidifier Work Well?

using a humidifierA humidifier can be used with your heating unit to add extra moisture into the air. When the air is slightly moist, the heat will carry around well. It will move around the entire room.

Also, the heat will last for a longer period of time. It will not wear out quickly so you can always use your heater at a lower temperature if needed.

The heat will stick around for a while and you won’t have to compensate for losses by increasing the temperature. On a related note, you will not spend more money when you use a humidifier to keep the warm air under control.

How Will You Add the Humidifier?

A humidifier can always be added into a room that you plan on getting more warm air into. It helps to add it in a spot where you are more likely to use the heater in. This comes as you aren’t likely to find a humidifier that can be built directly into your heater unless you have an option that works with a water-based heating setup.

The humidifier should be prepared with a good water reservoir and should be in a spot not too far from your vents. This should help with getting the added moisture into the area without being harder to use than necessary. It will work wonders for your home when used right.

What About House Plants?

You can always use house plants alongside a heater to increase the humidity in a room. This works to allow a bit of added moisture as plants can generate a small amount of this in many cases. This should not be used as a total substitute for a humidifier but it can at least keep the load on that unit from having to be stronger than necessary.

Check carefully on how your heater is set up.. A great humidifier will do wonders for your heating needs when you consider how well it will preserve the air as it is heated.

Do You Ned Home Heating Repair?

Self-Check For Repair Needs

Your home heating system is a necessity for ensuring that your home is comfortable. A great home heating repair service can help you get many parts of your heating system fixed up to where it will feel more comfortable and easier to handle.

Is the Humidifier Working?

HVAC Repair ServicesSometimes the humidifier unit within a heater may not be working as well as it should. The humidifier is responsible for adjusting the moisture contents in your home and can work with the heater to create a comfortable room that is moist during the winter season and is a refuge from the arid conditions outside.

The home heating repair process may entail a look at the humidifier unit in an overall setup. This might have to be restored or at least topped off with some added fluid depending on the issue.

Do You Ned a New Battery?

hvac serviceThe battery in a heater might be the culprit in some cases. A battery can wear out over time and cause the entire heater to stop working.

A plan to fix the heater can help by getting the battery replaced with a new one that will be fully charged and should not have any rust or other materials on it that can keep the power on it from flowing properly.

The battery must still be fully attached to the unit in order for it to work as well as possible. You may also have to reset the program on your heater to make it work.

Filtration Support

Filters can tear up at times and can make it harder for your surface to stay comfortable. You will need to get your filter replaced on a regular basis to ensure that nothing wrong can come about when trying to get your home to feel comfortable.

Electricity Connections 

Good connections are needed to ensure that your heater can link up to a good electric system with ease. A great electrical connection feature can help you out with ensuring that the heater you have will actually work. You must make sure your connection is secure without any problems.

Drain Lines 

Drain lines must also be checked on your heater. A good heater can drain gallons of water each day and can become clogged with sediment and mold among other items. The furnace can stop working if there is far too much water in the way. However, you can use a repair service to help you clean out and possibly replace your drain lines so they will not be backed up.

The lines must also be checked to see if they are leaking. Leaks might cause some of these lines to wear out all that quickly while also making it easier for rust and corrosion to develop on your heater in the worst possible cases.

The process of home heating repair will help you to ensure that your setup is carefully controlled and that you will ensure that your home is heated properly and kept as comfortable as possible. Be sure to get your heater prepared the right way so it can stay functional.

Choosing the Best Dallas Heating and Plumbing Company

There are many different heating and plumbing companies in Dallas, TX. Dallas Plumbing Company offers Plumbing, heating, HVAC, and home ac repair services to the entire DFW area. Here are a few tips you can use to find the best Dallas heating and plumbing company.

What Charges Are Used?

plumbing and heatingThe charges that are used by a heating and plumbing company can vary based on who you contact. These include charges for inspecting a system, labor-related charges and so forth. Some companies tend to add lots of these charges just to try and jack up the price and get more money.

 You have to be cautious as there are often times when you might bear with employees who might take longer to work because they charge by the hour. You will have to be cautious here as there might be times when someone who end up charging you more money than necessary.

How Are Staff Members Brought Out?

 HVAC and plumbing staff members tend to come out to places through their fully-staffed vehicles that contain all the necessary pieces of equipment required to take care of certain jobs. A staff member must be fully prepared to get the necessary tools out right on the spot, thus reducing the amount of time needed to complete a task. This in turn should provide a user with support for the different needs that one holds while getting items fixed or resolved in your home.

What Services Are Available?

The services that can come from an HVAC specialist can include all kinds of maintenance and repair solutions. From plans to remove old clogs to special procedures for maintaining any coolants in your air conditioner, you need to see that the specialist that you’d want to hire is capable of doing what you need to have done.

 What About the Guarantee or Warranty?

 A guarantee or warranty may be offered in some cases. These are solutions that are devoted to ensuring that you will not be at risk of bearing with any harm around your property.

 A guarantee will state that you will not have to pay for anything in the event that there is some kind of a problem with the way how your setup is being used. Many plumbers and HVAC specialists are willing to offer warranties as a means of helping customers get the support that they deserve.

Remember to watch for the features that a heating or plumbing company might have to offer. You need to be certain that you are fully aware of how well you’re heating and plumbing plans can work for your needs so you’ll have more control over anything you want to use and handle.


Heating and Air Conditioning Services

What kinds of solutions does your heating and air conditioning service company offer? Do you contact them when your house gets too warm or too cold? What about when you observe that the high top quality of your fresh air seems to be diminishing? There are a number of solutions that most regional companies provide that will keep yourself you members members comfortable at house regardless of the elements outside.

Routine Maintenance

heating and air repair service

Heating and Air Repair and Maintenance Service

Every year, when the elements changes, your air conditioner need to be examined out. Before you turn either program on, a professional comes out to the house and works a full examination. If there are any recognizable issues, he or she will be able to fix them right away and examine to create sure that the program is working properly. These servicing sessions are crucial to your program and often ensure that you do not let issues get out of hand. When you capture a issue early on, the repairs are generally less expensive and less time intensive.

Duct Cleaning

Do you have any idea what type of dirt, dirt, and waste are located in your ducts? The air conditioner techniques use these channels to bring comfort within or fall the heat range to help everyone awesome off. Either way, the channels usually contain all kinds of pollutants. If they are not washed out frequently, that waste falls noiselessly into your house. Even if you change your filtration consistently, yourself you members members can still run into issues.

Quality Checks

If you are involved about the fresh air in your house and its overall top quality, you can demand that a specialist run a analyze on your house. You can find out if you have a lot of pollutants or if your close relatives members is respiration securely. Once the analyze has been run, you can examine your filtration to see if they need to be modified and you can organize for duct washing if necessary.


Eventually, there is a good possibility that your air conditioner techniques will need one or more servicing. When you first observe that something isn’t right, create sure that you contact the experts. They can come out and take a look and let you know what the issue is right away. Many times a specialist will be able to create improvements and servicing on-site to get your program running right once again.


Unfortunately, servicing are not the only issues that property owners usually run into. Sometimes a alternative unit is needed. A air conditioner organization can describe all of your options and help you choose the best program for your house. From there, they will handle the elimination of the all program and the set up of the new one.

Overall, it can be said that the heating and air conditioning service mainly offer these services mentioned above. Anyone can easily get proper idea about HVAC service through the discussion. You can also get more information visiting more visiting the different sites in the internet so that you can easily get the proper idea regarding heating and air conditioning service.