How to Prevent Lime Scale in Your Plumbing Fixtures

Remove Limescale

Lime scale is a white chalky deposit or stain, which is usually formed on the plumbing system by a combination of soap residues and hard water. Often it is easy to identify them as they leave ugly stains on faucets, taps, sinks, washing machines, boilers, kettles, tubs, central heating systems and so on. These stains usually become harder to clean and remove if they are allowed to form without addressing the problem in time.

It is cheaper, much easier and less time consuming to prevent lime scale build up in your plumbing fixtures rather going through the descaling and removing process. This article is going to look at methods on how to prevent lime scale in your plumbing fixtures. 

1. Use Water Softener 

A water softener is a great way to prevent lime scale build up in your plumbing fixtures. This substance is available in forms of powder, gel, and tablets. You can use it along with your daily cleaning detergents or soaps as you carry on with your routine chores around the house. Water softeners usually work by bonding with the minerals found in water dissolving them before they cause harm or damage to your plumbing fixtures and other appliances.

2. Water Filter 

A water filter is another essential way that you can use to remove unwanted minerals that are found in hard water. Filters are like cartridges and they come in similar form, which can be replaced or changed from time to time according to the expiry date of the specific piece you get. Water filters can be installed on faucets and taps to filter out the magnesium and calcium concentrates high content from water, which are the main culprits for the lime scale formation. 

3. Magnetic Water Conditioner and Descaler System

A descaler system and a magnetic water conditioner is another method that prevents the formation of lime scale traces on plumbing fixtures in the entire water system. This method operates through a system that is installed and attached to the main water supplying pipe of the entire household. This method starts to work immediately after it is successfully installed saving you the costs of repairs and appliances replacement. The descaler and conditioner system works through magnetizing the water together keeping them in suspension to prevent accumulation on pipe walls and other related surfaces. The magnetic field built by this method also cleans the existing lime scale traces or stains in the water system and softens it. 

4. Vinegar and Lemon Juice

Another preventive measure that you can use to prevent lime scale formation is to use a mixture of vinegar and lemon juice solution in your appliances. You can flush appliances such as coffee machines, kettles, espresso machines and so on from time to time to combat any kind of lime scale build up. 

To wrap up the loose ends, it is worth to mention that repairing plumbing fixtures and replacing home appliances can be an expensive affair, so it is necessary to take into account the precautionary measures to avoid them. Ensure you close check your water pipes, appliances and other vulnerable surfaces for any lime scale deposits build up, to prevent further plumbing complications down the line.

How To Change A Garbage Disposal

<iframe> width=”560″ height=”315″ src=”” frameborder=”0″ allowfullscreen></iframe>

Every home owner who has a garbage disposal will probably have to replace it at some time. It will save you money and other hassles replacing your garbage disposal if you do it yourself. This is because in most cases hiring a plumber to replace a garbage disposal is inconvenient and expensive. You find that replacing a garbage disposal is quite simple and you only need the common tools to do it. More so, this gives you a chance to shine and save money that you could have paid for those services. This piece is going to give tips and other important insights on how to replace a garbage disposal.

How to Replace a Garbage Disposal?

The first thing when you want to replace your garbage disposal is check and see the model, make as well as the horsepower of the existing garbage disposal. You can get this information on the data plate of your disposal. It is important because these details will come in handy while getting a new garbage disposal. If you can get the same model, make and with similar horsepower, everything will line up easily. If the unit you are looking for is no longer available, then your local home improvement dealer will probably suggest another substitute for you or you can go online and do your research to get this information as well.

Secondly, remove everything that is under the sink of your garbage disposal to give you room to work. More so, this will allow to check and see how the plumbing is done or configured. Most of us don’t have a photographic memory and I would suggest that you take a photo before you open up anything of how your disposal is hooked. This will be essential if you forget what goes where while putting a new disposal in place. I know you have heard this phrase a picture talks a thousand words, if you take a picture, you will probably understand this phrase.

Thirdly, take with you the information that you took in the picture to your home improvement dealer. If the dealer gets the picture of the configuration of your old disposal, the dealer will give you tips that will help you during replacing of your new garbage disposal, as well as the other things you will need.

Fourth, when you purchase a new garbage disposal you will find that most of them come with instructions. If you will need a special wrench during installation, it will probably be in the packaging. In most cases, a wrench is included to allow you to turn the disposal manually if it is jammed. Don’t keep this in a place out of reach because you might need it in future for repair purposes.

When you have a new disposal, a template of instruction on how to install it by yourself then the rest falls into place easily. To make things simpler always remember the basic home plumbing tips and rules. Plan on what you want to do, ask as many questions as possible, follow the instructions closely and work your plan. Enjoy the fruits of your labor. Good luck.

Home Plumbing Tips

There are several times when your faucets leak, your bathroom overflows or sometimes when your kitchen sink becomes clogged. In such cases, most of us simply move our face in dismay or look for a miracle. If this has happened to you as well, it is high time for you to follow a few useful home plumbing tips so that you understand the ways to handle the emergency plumbing issue.

Having known few tips on plumbing and following those at times of emergency can be of great help to you. Here are few simple yet helpful; tips on home plumbing that come handy to you at times of emergency.

General tips on plumbing

  • Getting ready– Do not lose time while waiting for trouble to happen. You may at times go and check the primary water supply switch and also check the drains if they are dirty. If you do not check at regular intervals and clean them, there are increased chances of the drains being clogged.
  • Do not panic at times of plumbing emergency– Panicking at times of plumbing emergency will do no good. Thus, it is suggested to stay calm at times of plumbing trouble and find out the issue so that you can fix them.
  • Understanding the plumbing system in your home or office– Share your general plumbing knowledge with your whole family. Also, locate the primary water source and then shut off the valves if there is a massive leakage.
  • Ensure to keep at least 3 plumbers’ contacts ready– Even in case you repair the minor difficulties, it is always suggested to keep contacts of multiple plumbers ready. In case one plumber is not available, you may approach the other plumbers to come and attend your plumbing emergency. Always put this data near your telephone or save those contacts in your cell phone. This would ensure that you can find them very easily at times of emergency.
  • Both maintenance and great protective measures are necessary– You can practice protective plumbing measures like pouring boiling water down the drains that draw grease and clear the debris. This will protect the drains from the clogs.

Handling few common plumbing problems all by yourself

Clogged drain– You may use a plunger to clear the clogging of the drains. In case it fails to work, then you may opt to use a plumber’s snake for the purpose. You may also utilize certain drain cleaners which contain powerful chemicals and can clear off the drains very effectively.

Overflowing toilet– There are several times when the toilets overflow due to overuse and clogging of the drains. The overflowing of the drains is also due to the float rising at a higher level. You may replace the necessary parts all by yourself in order to do away with this problem.

Struck faucets– This is a common plumbing problem and can be very easily resolved by removing the mineral deposits which are struck inside the faucet. You may very conveniently use FSA-approved silicon grease in order to smoothen the sink. It is never advised to apply petroleum jelly in such cases.