Can a Wet-Dry Vacuum Help with Solid Plumbing Clogs?

Solid plumbing clogs can develop in a variety of ways. They can come from any hard item that is thrown down a drain. This often comes when kids play along with a drain and throw stuff like toy cars in them. Sometimes food wastes might be a little too hard to handle as well.

Wet Dry Vac

Regardless of what causes this problem in your plumbing system, you can always get some of these tough clogs removed with a wet-dry vacuum. wet dry vac This is a type of vacuum that is designed for handling wet or dry conditions alike. It uses a larger canister that is secured enough to take in all sorts of materials.

This can be emptied out as needed too as it can take in plenty of water and solid materials alike. This is perfect for when you’ve got something that has been jammed up in your plumbing system and isn’t coming out on your own. A vacuum like this will use a simple setup that isn’t too hard to use.

Best of all, it is easy to rent one of these vacuums if needed. You can always go to a local home improvement store to rent one. Some supermarkets even offer rentals.

Read the Instructions Before Starting

To start, you must check the instruction on whatever you are using. You must ensure the vacuum will not be in any spots where electric hazards might develop. This is especially important as failing to use it properly could cause you to lose your deposit on a rental if applicable.

You’ll have to get the hose for the vacuum added into the drain. This works best when the drain is dry as it allows air to move around without all that much obstruction.

The vacuum should be set to a suction mode so it will draw air into the vacuum. This creates a setup where air moves inward to successfully clear out any blockages or other difficult things that you might be bearing with in your property.

Be aware of any blow backs that occur. This is where the air will cause some splashing to occur. You will have to clean up this space yourself although it should not be too hard to get it cleared out.

You can always switch between the push and pull functions on the hose to move air inward or outward. This is to create a plunger-like effect. It helps with loosening up all sorts of items inside the setup. The force will still be greater than what you’d get with a more traditional material.

This is a process that can make a real difference when you’re aiming to keep your plumbing system clear of these difficult clogs from objects and other solid items. Be sure to work hard with a great wet-dry vacuum if you want to keep what you have secure and easy to handle for any demand you hold.

Water Purification Plumbing Needs

As great as it can be for you to get water into your home with ease, you must make sure that water is clean and healthy. Your home could be at risk of harm if the water coming into it isn’t pure.

water filter

Impure water can be harmful to your body in many cases, what with there being many metals and chemicals found in water that isn’t treated. This water could also cause problems with your plumbing system, what with it potentially weakening different fixtures all around your property.

Fortunately, it should be very easy for you to keep your plumbing setup under control when you get a purification setup ready. This is to help you get the most out of your plumbing demands.

A Softener Can Be Added

One part of the purification process that can work entails getting a water softener ready. This helps to keep mineral deposits and buildups from developing. This also keeps water spots from developing. This can be linked up to your entire plumbing setup that is easy to follow.

This softener often requires the use of secure materials that keep hard water issues under control. This will require its own reservoir that is attached to your plumbing system but it will be worthwhile if it is stocked properly and inspected regularly.

Filtration Is Necessary

A home filtration system may be used as well. This may work with a main filter located at the base of your system and individual filters around each individual tap or water outlet. This often works with traditional physical guards although ionization may be used to neutralize some chemical deposits that might be too difficult to see in some cases. Filtration helps with keeping your water comfortable without being otherwise difficult to handle in any case.

The filtration system in your home would have to be checked regularly to see that it is functional and easy to handle. It should be inspected regularly to see that it will not wear out quickly or leave in harmful particles in any way.

Don’t Forget Heating

Heating can always work when taking care of bacteria and other potential problems in your water. Heat helps to purify water in many serious situations as it steams off harmful materials inside it. Fortunately, you can get a purification setup to work with a whole-house water heater. This can be used to heat up water and then be delivered through a heated tap in any space.

This should be perfect when you have a need for something warmer. Best of all, such a heater can keep you from having to run water for too long just to get it all heated up.

The need for clean water in your home should be checked carefully as it can keep you from dealing with serious problems relating to how water comes out. You should look carefully at how the purification plans for your plumbing system is organized.

5 HVAC Trouble Prevention Points

Preventative Points for Your HVAC System to Use

When getting an HVAC system ready in your home, you have to think carefully about how it is going to be set up and maintained. There are many things that can be done with prevention in mind.

These solutions will keep your HVAC system from being at risk of serious damages. They also make your HVAC unit work better without wearing out any faster than it has to.

#1- Keep Your Filter Controlled

carrier hvacA proper air filter is needed to keep your HVAC system working. An air filter should take in foreign air particles and keep them from getting into your vents or other features inside your HVAC unit.

The filter should be replaced every few months. It should also be cleaned out every month in between each replacement just to keep it working clearly and quickly.

#2- Keep Space Open

You need at least two feet of space around your AC unit at all times. This is to let it get in enough outside air without being crowded in a spot where it might potentially overheat in.

#3- Protect the Outside

The outside has to be protected well enough so it will not take in grass clippings while mowing your lawn or dead leaves from a tree. You might have to create a small fence area near one side of the HVAC unit if it’s near a spot that you will trim with a mower. You must also trim off any branches of nearby trees so the risk of leaves or other items falling into or on top of the HVAC unit will be reduced.

#4- Clear the Condensate Drain

The condensate drain in your HVAC system should be reviewed carefully. It must be cleaned out every year so it will not develop bacteria or other kind of dirt. A good mixture of bleach and water can be added to your HVAC system to make it easier for this to be cleaned out right although you will need to be careful when getting it ready to work.

#5- Check All Refrigerant Lines

You need to look at the refrigerant lines every month to see that they are working. These should not have any clogs in them. They should also be carefully insulated. This is to keep them from wearing out or struggling to work as well as they should. You’ll have to see that these are run properly without being harder to follow than necessary.

Remember, working hard with your HVAC system will help you to keep it functional and ready to take on anything. Be sure you check on your HVAC system regularly to see that it’s working fine and that there will not be any problems coming out of it. This will make a real difference when done correctly and without problems.

Water Supply Lines and Residential Plumbing

Water Supply Lines

Water supply lines are located throughout any home plumbing system; in fact, you probably already noticed that under the sink or toilet tank a small pipe connected between the faucets or tank and the water shut-off valve.

It is important that one knows as much as possible about water supply lines because it is one of the easiest plumbing repairs around the house.

Even though supply lines leakages are considered an easy fix problem, the reality is that most people fail to properly diagnose water leakage in their home.

My goal in this page is to educate and promote awareness about water supply lines, how to diagnose a leak and how to fix it yourself.

Determining if the leak is in the supplies?

  1. The most common sign of leakage is the presence of mold under the water supply lines and around the areas where water is leaking from.
  2. Check the supplies for water rust and hardness buildup between the fittings and the supplies.
  3. If mold or hardness is present, you will probably notice water running or dripping even if it is slowly along the supplies, this means that the supplies need to be replaced. P.s: Carefully check the source of the leak before replacing anything.

Before replacing a supply line:

Before replacing the supplies, one must understand that are different types of supply lines available in the market.

Water supply lines for faucets and toilets are available on a variety of materials but, the following are the most common materials: plastic, chrome and metal.

Before buying the water lines, determine if the supplies will be used for faucets, tub, or toilet, also, learn about the length and the size needed.

Why do you need to know that?

Water supply lines for toilets are different from the supply lines used for faucets. The supplies will differ in length, diameter and head size.

Toilet Supply Line:

The toilet supply lines are shorter than the faucet supplies. A toilet supply is shorter and has a bigger head in the end to proper fit in the fluid master bottom pipe connection, which is bigger in diameter than the faucet piper connection.

Faucet Supplies:

The faucet supplies are in most cases twice as longer as the toilet supply. In most cases, the plastic and chrome supplies will have the same diameter; however, the head of the faucet supplies will be smaller than the toilet one.

Tools needed to replace supplies:

You don’t need to use leather gloves, however, latex gloves are advised to have with you, also, you will need a razor blade, different sizes of channel locks, and 7/16 crescent wrench, thread sealing tape, supply lines, new ring gaskets.

Replacing supplies:

This is probably one of the easiest of all plumbing jobs that you will ever do in your home, as long as you follow the below instructions.

  1. Shut off the water at the angle stop valve (s), if there isn’t an angle stop valve by the fixture, then you might have to shut the water off for the whole house at the main valve inside or outside the house in the meter.
  2. Drain all the water from the local pipe, as much as possible by flushing the toilet, running the tube, running the sink etc.
  3. With the proper tool, lose the nuts and unscrew the supply (supplies) on both ends, remove the supply (supplies), make sure to have a small container and rags to dry out the rest of the water.
  4. If you bought plastic supplies, take the proper measurement from the old supply (supplies) and with the razor blade cut the new supply (supplies) on the needed length.
  5. Wrap the threads in the angle stop valve three or four times and, after the nuts and gasket rings being through the supply (supplies), insert the supply inside the valve fitting and then, manually tight it on both sides, because to not cross thread the nuts, you don’t want to damage them, once you have threaded all the way, use the crescent wrench to finish tightening the nuts.
  6. Turn the water back on and check for leaks, if there are no leaks, you have accomplished the task successfully. This whole process should take about 15 to 30 minutes.